(Kile Rotor Impellers are covered by one or more of US Patents & Canadian Patents #8,979,623 #9,089,094, #2,763,483, #9,924,637, #9,924,638, #9,936,643, #10,582,665 & Patents Pending)

Impellors- standard kits

KRF®80 kit-$1200.00 US+s&h(includes 2 rotor flight® impellers;2 caste wear plates; mounting hardware)

KRF®60kit-$1485.00 US+s&h (includes 3 rotor flight® impellers;3 caste wear plates; mounting hardware)

KXF®66 or 88 Kit- $915.00 US+s&h (includes 2 rotor flight® impellers; 2 caste wear plates; mounting hardware)

KXF7890 ST Ch Kit (Standard Edge)- $1195.00 US+s&h (includes 2 rotor flight® impellers; 2 caste steel wearplates with chrome edge for longer wear; mounting hardware)

KXF7890 NE Ch Kit (Narrow Chrome Edge)- $1195.00 US+s&h (includes 2 rotor flight® impellers; 2 caste steel wearplates with chrome edge for longer wear; mounting hardware)

Narrow Edge Impellor kits.

Narrow edged wear plates are beneficial for all crops and green stem beans

KRF80NE kit $1200 US+s&h;

KRF60NE kit $1485 US+s&h;

KXF66SE $941US +s&h or KXF88NE kit $858US +s&h;

KXF7890NE Ch $1195.00+s&h (applied chrome on narrow edge-for extended wear

Sharpened Impellor kits.

Sharpened wear plates are beneficial for 'sizing' when harvesting grass

KRF80SE kit $1230 US+s&h;

KRF60SE kit $1530 US+s&h;

KXF66SE or KXF88SE kit $941US +s&h;

KXR7890SECh kit $1240.00 US +s&h

KRF® Standard Replacement wear plates:

KXF® Standard Replacement wear plates for either 66 or 88(specify which are
needed when ordering): $325.00 US+S&H

KXF7890NE Ch (Narrow Edge) or KXF7890WE Ch(standard edge) $405.00+s&h (applied chrome on narrow edge-for extended wear

Optional wear plates

Sharpened Edge Caste--These plates are designed for material sizing; where material wrapping can occur causing rotor bearing failure. Which can be a problem with grass harvesting.

WP KRF 80CCSE Wearplates $369.00 US+s&h;

WP KRF 60CCSE Wearplates $345.00 US+s&h;

WP KXF66 SE or WP KXF88 SE $350US +s&h;

WE KXF 7890SE Ch Wearplates $439.00US +s&h

ALL REPLACEMENT WEAR PLATES KITS COME WITH MOUNTING HARDWARE.

Rotor Transition Plate Kits

Abrasive-resistant alloy steel which bolt onto existing rotor plates. Our transition plates re-establish the correct height and length of the original rotor specifications.

KRTP-60--set of 3--$298US+s&h

KRTP-80--set of 4--$324 US +s&h

Rotor Extension & Mid-Extention Bars for AFX Rotors

Caste extension bars for AFX88 series rotors. Replaces OEM parts

K-543 Flight Extension Bars (for between flights) $130.00 US + S&H

K-544 Flight Extension Bars(for a continuation of flight on rotor) $207.00 US + S&H

K-5434 Kit (contains parts K-543 & K 544) $337.00 US + S&H

Transition Bars for AFX style rotors-

4 K552 bars needed for early AFX row zero rotors

2 K552 bars needed for Flagship large tube rotors

2 K552ST bars needed for Flagship small tube rotors

0

Single K-552 with mounting hardware $49.58US + S&H

Single K-552ST with mounting hardware   $70.20US + S&H

Fertilizer & Tillage

K5017-LC Left Scraper blade with carbide $72.00 US +S&H

    K5017-RC  Right Scraper blade with carbide $72.00 US +S&H

K5017-SLD-L-Left Trash Sheild designed for Kile scraper blade-$31.25+S&H

K5017-SLD-R-Right Trash Sheild designed for Kile scraper blade-$31.25+S&H

K 12 with carbide - $55.49 US + s& H

K131 (no fertilizer tube)*- $84.25US + s&h

K131/1 (one fertilzer tube)*-$104.25US + s&h

K 131/2 (two fertilizer tubes)*- $112.25US + s&h

K311B/1 (one fertilizer tube)*- $168US + s&h

K311B/2 (2 fertilizer tubes)*-$178 US +s&h

*mounting hardware included

K740 JD CE(cast edge) - $11.98US + s&h
K740 JD CT (cast tip) - $12.40US + s&h

K902 JD CE (cast edge) - $13.65US + s&h
K902 JD CT (cast tip) -$16.38US + s&h

Thresh Bars

Rotor Thresh Bars(U.S.Patent 8,087,982; 8,475,247; 8,529,325; 8,602,856 & Patents Pending)

All bars are cast chrome except where ductile iron (DI) is indicated

Specialty/AFX/Flagship Large Rotor Thresh Bars:

K 505TD (10 degree - extended rasps) $31.25 US each + s&h

K 506 (extended rasps) $31.25 US each + s&h

K 505SP (Spiked 10 degree rasp bar) $33.87US each + S&H

K 507 (Spiked with extended rasp) $33.87 US each + S&H

K507C (Carbide spike with extended rasps) $44.50 US each + S&H

Small Tube Rotor Thresh Bars:

Bar K 518.2 (10 degree dual bolt extended rasp) $62.50 US + S&H

K 519.2(10 degree spiked dual bolt extended rasp) $62.50 US +S&H

K 519.2C (10 degree Carbide SpikeDual Bolt extended rasp) $75.00 US + S&H

K 520.2 (28 Degree Dual Bolt Extended Rasp) $62.50US + S&H

K 521.2 (28 degree dual bolt Spike Extended rasp) $62.50 US + S&H

K 521.2C (28 degree Carbide Dual Bolt Spike extended rasp) $75.00 US + S&H

K RPB (Rice Push Bars) $85.00 US each + S&H

Standard Rotor Thresh Bars:

K 4009 60 Series (12 helical/9 straight bars) $2759.97 US set + s&h

K 4009-3 60 Series Special set up (3 helical & 9 straight bars)

$1577.13 US + s&h

K 4010 80 Series (16 helical/12 straight bars) $3679.96 US set + s&h

K 4009/ K 4010 single straight or helical bars-

sold individually with mounting hardware $136.23US ea + s&h

K 4010-3 80 Series Special set up (4 helical & 12 Straight bars)  $2102.84US + s&h

Kile Straight Separator Bars:

Caste Chrome Bars for Specialty and AFX style rotors

K 4017 Bar $99.30 US ea +s&h

Kicker Bar:

For Specialty and AFX style rotors (AFX8010; 1480; 1680/82/88; 2188; 2377/88; 2577/88; 5088; 6088; 7010/88; 7120; 8010; 8120; 9120)

K 1327 Bar $89.95 US ea (2 needed) +s&h

Caps

Caps are covered by one or more of the following US & Canadian Patent numbers: #D666,227 #D689,108 #D699,772 #D700,227 #D725,688 #8,684,474 #8,833,872 #8,979,215 #9,120,514, #2,748,643, #2,794,043 & Patents Pending)

Plug Wrench Kits, Individual Plugs & Plug Wrench:

Kit-Plug/wrench 40- $79.95 US +S&H (40 plugs & 1 plug wrench)

Kit-Plug/wrench 20- $39.98 US + S&H (20 plugs & 1 plug wrench)

K 1215-P universal plug with o-ring for all caps with plugs

$2.00 US ea

K 012P OR (o-ring for plug) $0.21 US ea

K 1216 W (universal plug wrench)

$3.75 US ea + s&h

Camso® Caps:

(replaces original part# 1000129 &/or part #1000169 of Camso®CTS Systems)

Order the number of single caps required for the Model unit your track system needs. We will package per customers needs.

Part #K CVC CP3777-20

(20 caps with orings & gaskets; 40 plugs; bolts and plug wrench)

$561.49US+s&h

Part#K CVC CP3777-24

(24 caps with orings & gaskets;48 plugs;bolts;plug wrench)

$685.13US+s&h

Part # K CP3777

(replaces either idler or midroller OEM cap)

$28.65 US ea + s&h (single cap with Oring/gasket/bolts/plugs)

Part # Camo Oring

$2.25 ea + s&h

Part # K CP3777-G (gasket)

$3.10 ea + s & h

Part # K CP3778-(Cap with mounting hardware) For planter idler hubs

$28.65 US +s & h

STX: (fits STX/Steiger/Row trac tractors)

Part#K-CVC-STX Kit:

(16 idler & 24 roller caps with o-rings, plug wrench and 40 plugs)  US$730.22+s&h

Individual Parts:

K 8743-I2 (idler cap)$24.79 US ea +s&h(includes cap, plug, plug wrench + oring)

K 8740-R2 (roller cap) $22.44 US ea +s&h(includes cap, plug, plug wrench + 2 o-rings)

K 8740-PR2 (roller cap) $25.73 US ea +s&h(includes cap, plug, plug wrench + 1 o-ring)

K 5426 IOR (ilder o-ring)$2.80 US ea+ s&h

K 2780 ROR (roller o-ring)(fits STX tractors serial #107427 & below) $2.80US ea+s&h

K 4140 ROR (roller o-ring)(fits STX tractor serial #107428 & above) $2.80 US ea +s&h

Set:

SET: K STX 2780E o-rings (16idler &24 roller o-rings)

$94.50US+s&h

SET:K STX 4140L o-rings (16 idler & 24 roller o-rings)

$94.50 US + s&h

Case IH Trac Combines (fits:Combine Trac Systems)

Part # K CVC CTS/OR Kit:

(contains 8 idler/12 roller caps with o-rings, plug wrench & 20 plugs)

$365.12 US + s&h

Individual Parts:

K 8743-I2 (idler cap)$24.79 US ea +s&h

(includes a plug, plug wrench & o-ring)

K 8740-R2 (roller cap) $22.44 US ea +s&h

(includes a plug, plug wrench & o-ring)

K 5426 IOR (idler o-ring) $2.80 US ea +s&h

K 4140 ROR (roller o-ring)$2.80 US ea+s&h

Set:

SET:K CTS o-rings (8 idler & 12 roller o-rings)

$47.25 US+s&h

Case 9300 Series:

Part #K-CVC-9300: (fits 9370, 9380, 9390 trac tractors)

(contains 16 idler/24 roller caps with gaskets/orings 24 plugs, plug wrench & bolts/washers)

$883.58 US+s&h

Individual Parts:

K 9343-I (idler cap) $20.86 US +s&h (includes gasket)

K 9340-R (roller cap) $31.48 US + s&h

(includes plug,o-ring & plug wrench)

O-ring-K-237-R$1.11 US +s&h

Roller gasket K9340-RG-$2.00US+s&h

Gasket

K-9343-G or K 9343-GE $5.90 +s&h (specify gasket hole type-R or E)

Bolt K-820-HHCS$0.25US + s&h

Washer K-516-FL$0.07 US+s&h

Set:

SET: K 9300G/OR/RG(16 9300 Idler Gaskets;24 Roller o-rings & gaskets)

$102.90 US +s&h

SET: K 9300GE/OR/RG(16-9300 Gaskets(elongated holes;24 roller o-rings & gaskets)

$102.98US +s&h

SET: K 9343-G (16 9300 Gaskets (round holes)

$63.00 US +s&h

SET: K9343-GE (16 9300 Gaskets (elongated holes)

$63.00 US +s&h

SET: K237 ROR (24 Roller orings for 9300)

$26.00 US +s&h

SET: K9340-G (24 Roller gaskets for 9300)

$50.04 US+ s&h

Delta Versatile Clear View® Cap Kits

Part # K CVC D-RX Kit

(16 idler caps/16 roller caps/orings/plugs & Plug wrench)

$854.70 US + s&h

(fits 450DT; 500DT; 550DT)

Individual Parts:

K JD9850-R (roller cap) $29.96US + s&h

(includes cap, plug, plug wrench & o-ring with gasket)

K JD9852-I (idler cap) $38.24 US + s&h

(includes cap, plug, plug wrench & o-ring)

K JD366-OR(idler o-ring) $3.00 US + s&h

K JD348OR(roller o-ring) $3.00US + s&h

K JD9850-RG (roller gasket) $2.90 US + s&h

John Deere:

Part # K CVC JD 8RT

(4 idler caps/12 roller caps/orings/gaskets/plugs/plug wrench)

$494.72 US + s&h

 (fits 8RT tractors) Fits 8295RT, 8310RT, 8320RT, 8345RT, 8370RT

Part# K CVC JD 9RT

(4 idler caps/16 roller caps/orings/gaskets/plugs/plug wrench)

$605.71 US +s&h

(fits 9RT tractors models 9430T, 9460RT, 9470RT, 9510RT, 9520RT, 9530T, 9560RT, 9570RT, 9630T,9460RT

Part # K CVC JD 8000

(4 idler caps/12 roller caps)

$572.15 US + s&h

(fits up to JD serial#901999- Tractors 8100T, 8200Tm 8300T, 8400T, 8110T, 8210T, 8310T, 8410T; early 8120T, 8220T, 8320T, 8420T, 8520T, prior to s/n901999 with 5" wide roller rims.

Part # K CVC JD 8500

(4 idler caps with gaskets/12 roller caps with orings & gaskets, plugs, plug wrench)

$572.15US + s&h

(from JD serial#902000; Fits 8120T, 8220T, 8320T, 8420T, 8520T with 8"wide roller rims; late 8120T, 8220T, 8320T, 8420T, 8520T, s/n902000 & up with5" roller rims; all 8230T, 8330T, 8430T)

Part # K CVC JD 9000

(4 idler caps with orings/16 roller caps with orings & gaskets/plugs/plug wrench)

$607.53 US + s&h

(fits 9300T, 9400T, 9320T, 9420T, 9520T, 9620T)

Part K CVC JD8RX

(16 idler caps/20 roller caps/8 small cover tensioner caps/orings & gaskets/plugs & Plug wrench)

$874.95 US + s&h

(fits 8RX Track Tractors)

Part # K CVC D-RX Kit

(16 idler caps/16 roller caps/orings & gaskets/plugs & Plug wrench)

$854.70 US + s&h

(fits 9RX Track Tractors)

Part # K CVC D-RX NT Kit

(16 idler caps/ 24 roller caps/orings & gaskets/plugs & Plug wrench)

$1049.98 US + s&h

(fits RX Narrow Track Tractors)

Individual parts:

K JD8024-R (8000 series roller cap)

$36.70 US + s&h

(includes cap, plug, plug wrench & gasket)

K JD8025-I (8000 series idler cap)

$42.85 US +s&h

(includes cap, plug, plug wrench & gasket)

K JD8024-RG (8000 series roller gasket)

$6.64US + s&h

K JD8025-IG (8000 series idler gasket)

$7.55 US+ s&h

K JD9034-R (9000 series roller cap)

$28.52 US + s&h

(includes cap, o-ring, plug wrench & plug)

K JD9035-I (9000 series idler cap)

$43.26 US+ s&h

(includes cap, plug, plug wrench & o-ring)

K JD159-IOR (9000 series idler o-ring)

$2.25 US+ s&h

K JD240-ROR (8500 & 9000 series roller o-ring)

$2.25 US+ s&h

K  JD9848-R (8RX tensioner roller cap)(OEMpart #R569150)

$21.92 +s&h

(includes cap, plug, plug wrench, gasket & o-ring)

K JD9850-R (RT & RX series roller cap)

$29.96US + s&h

(includes cap, plug, plug wrench, gasket & o-ring)

K JD9852-I (RT series idler cap)

$38.24 US + s&h

(includes cap, plug, plug wrench, gasket & o-ring)

K JD9854-I (8RX Series)(replaces OEM part#R571963)

$38.92 + S&H

(includes cap/oring/gasket/plugs/plug wrench)

K JD366-OR(RT idler o-ring)

$3.00 US + s&h

K JD348-OR (RT roller o-ring)

$3.00 US + s&h

Sets: 

SET:K JD 8000-G or K JD 8000-GE

(8000 JD Gasket Kit 4 Idler/12 Roller gaskets- specify either G-for round holes or GE for oblong holes in gaskets)

$50.40 US + s&h

SET:K JD 8500

(4 JD8025-I gaskets; 12 Roller o-rings & gaskets)

$63.00US + s&h

SET: K JD 9000-OR

(9000 JD O-Ring Kit 4 Idler,16 roller o-rings & gaskets)

$73.45 US + s&h

SET:K JD 8RT-OR

(4 Idler/12 Roller o-rings & gaskets)

$98.50 US + s&h

SET:K JD 9RT-OR

(4 Idler/16 Roller o-rings & gaskets)

$114.50 US + s&h

SET:K D-JDRX

(16 Idler and Roller o-rings & gaskets)

$177.50 US +s&h

SET:K JDRX NT

(16 Idler and 20 Roller o-rings & gaskets)

$193.75 US + s&h

Cat / Challenger / Lexion-Claas:

Challenger Series Kits:

Part#K CVC CH543 Kit:

(fits CH35, CH45, CH55 tractors)

(4 idlers/12 rollers with gaskets, plug wrench and plugs)

$ 517.88 US + s&h

Part # K CVC CH987 Kit: 

(fits A,B,C,D & E series-65,75,85,95--CH65, CH75, CH85, CH95 tractors)

(18 caps for rollers & upgrade most idler caps; with gaskets, plug wrench and plugs)

$607.53 US + s&h

Conversion Kit for 987 Idlers:

9

 Part # K CVC 987-I Conversion

(fits idler wheels of A, B, C, D, & E series)

$99.70 US + S&H

Kit contains 2 caps, 6 gaskets, plug wrench & plugs to update your present idler cap.

MT Challenger Series Kit:

Part#K-CVC-MT700/2

16 piece kit (Fits all MT700 Series Tractors)

(4 idlers/12 rollers, plug wrench & gaskets)

$542.70 US+s&h

Part#K-CVC-MT800/2

20 piece kit (Fits all MT800 Series Tractors)

(4 idlers/16 rollers, plugs, plug wrench & gaskets)

$660.95 US+s&h

Lexion/Claas Kit:

Part#K-CVC-LC/2

12 piece kit (Fits 700 Series C48;C49 C68)

(4 idlers/8 rollers, plugs, plug wrench, gaskets & o-rings)

$388.75 US+s&h

Individual Parts:

K 0784-CL

(Single Cap and oring)

$18.30 US + s&h

K 0784-OR

(Oring for Lexion/Claas roller cap)

$2.25 US + s&h

K CH3400-G

(Gasket for A & B series idler)

$8.15 US+ s&h

(single gasket)

K 3450-G

(Gasket for C, D, E series idler)

$4.83 US + s&h

(single gasket)

K CH3455-R(roller cap)

$32.24 US + s&h

(includes gasket, o-ring, plug wrench & plug)

K CH3456-I (idler cap)

$38.40 US + s&h

(includes gasket,o-ring, plug wrench & plug)

K CH3455-RG or K CH3455-RGE (roller gasket)

$3.75 US + s&h

K CH3456-IG or K CH3456-IGE (idler gasket)

$4.12 US + s&h

K MT6511-R (roller cap) dual port

$34.70 US + s&h

(includes gasket, cap, plug wrench & 2 plugs)

K MT6515-I (idler cap) dual port

$45.70 US + s&h

(includes gasket, cap, plug wrench & 2 plugs)

K MT6512-RG or K MT6512-RGE (roller gasket)

Fits both KMT6511-R and KMT6512-R caps

$4.80 US + s&h

K MT6514-IG or K MT6514-IGE (idler gasket)

Fits both KMT6514-I and KMT6515-I caps

$6.35 US + s&h

MT 8mmx20 bolt

$0.25 US + s&h

Sets:

SET:K MT 700-G or K MT 700-GE

(MT700 & MT700/2-4 Idler/12 Roller Gaskets)

$71.40 US + s&h

SET:K MT 800-G or MT 800-GE

(MT800 & MT800/2-4 Idler/16 Roller Gaskets)

$89.25US + s&h

SET:K CH 543-G or GE

(CH543-4 Idler/12 Roller Gaskets)

$63.00 US + s&h

SET:K CH 987-G or K CH 987-GE

(CH987-16 Roller Gaskets)

$63.00 US + s&h

Grip Trac Systems:

Part # K CVC Grip Trac Kit

(20 caps with o-rings)

$477.75.00US + s&h

Individual Part:

K 7120-GT

$23.89 US +s&h

(includes one cap & one each of the o-rings listed below)

K GT047 o-ring

$2.25 US + s&h

K GT161 o-ring

$2.25 US + s&h