Kile Machine & Mfg. Inc
Kile Machine & Mfg. Inc

Kile® Clear View® Caps (Delta Trac Series Tractors)

Caps are covered by one or more of the following Patent numbers: #D666,227 #D689,108 #D699,772 #D700,227 #D725,688 #8,684,474 #8,833,872 #8,979,215 #9,120,514 #9,399,369 #9,458,965)

Visualize oil levels with ease

Our Clear View® Caps fit Versatile Delta Trac Tractors. They assist you by giving operators the ability to view and maintain proper oil levels of the idler and roller hubs. Clarity of oil, as well as sufficient oil, can help prevent the replacement and downtime of your equipment due to idler and roller repair.

The benefits of our caps are:

  • Ease of view of oil levels of idler & roller wheel hubs
  • View clarity of oil
  • Scratch resistant
  • UV protected plastic
  • High impact plastic protects against breakage
  • Resistant to weather conditions of extreme heat or cold
  • View inside and outside idlers and rollers with ease
  • 5 year pro-rated warranty
K CVC D-RX Clear View® Cap Kits:
Installation Instructions:
Idler:
  • Remove OEM cap and allow cavity to completely drain.
  • Clean the face of hub.
  • Lightly grease the o-ring (part#JD366-OR) before installing and place in hub o-ring groove.
  • With o-ring in groove bolt cap (part#JD9852 I) on hub and torque bolts to 60-65 inch pounds.
  • Fill cavity with manufactures recommended oil.
  • Tighten plug with plug wrench.
Roller:
  • Remove OEM cap and allow cavity to completely drain.
  • Clean the face of hub and o-ring groove.
  • Lightly grease the o-ring (part#JD348-OR) before installing and place in hub o-ring groove.
  • With o-ring in groove bolt cap (part#JD9850 R) on hub and torque bolts to 40-45 inch pounds.
  • Fill cavity with manufactures recommended oil.
  • Tighten plug with plug wrench.
Use only soap and water to clean caps, no solvents (solvents can cause clouding and premature failure of caps. Solvent use will void warranty)
Print Print | Sitemap
Permission required prior to use of information on this site