Kile Machine & Mfg. Inc
Kile Machine & Mfg. Inc

Kile® Clear View® Caps for Grip Trac

Caps are covered by one or more of the following  US & Canadian Patent numbers: #D666,227 #D689,108 #D699,772 #D700,227, #D725,688, #8,684,474 #8,833,872 #8,979,215 #9,120,514 #9,399,369 #9,458,965; #10,215,334; #10,864,953.#2,748,643, #2,794,043   and Patents Pending

 

 

 

Visualize oil levels with ease

Caps for Grip Trac®* Systems

*Griptrac is a registered trademark of Gilbert & Riplo Co Corp USA

 

 

 

.

Cap Part# K 7120-GT .

Our Kile® Clear View® Caps fit Grip Trac® System Track idler and roller hubs. They assist you by giving operators the ability to view and maintain proper oil levels of the idler and roller hubs. Clarity of oil, as well as sufficient oil, can help prevent the replacement and downtime of your equipment due to idler and roller repair.

The benefits of our caps are:

  • Ease of view of oil levels of idler & roller wheel hubs
  • View clarity of oil
  • Scratch resistant
  • UV protected plastic
  • High impact plastic protects against breakage
  • Resistant to weather conditions of extreme heat or cold
  • View inside and outside idlers and rollers with ease
  • 5 year pro-rated warranty

K CVC GT Kit contents

Installation instructions:
Cap installation for Grip Trac® Systems:
  • Remove OEM Cap
  • Remove o-ring and allow oil to completely drain.
  • Inspect & clean present o-ring, if damaged, flattened or not acceptable for reuse, replace o-ring.
  • Lightly oil o-ring before installing, bolt clear cap to the hub and tighten bolts to 50-60 inch pounds.
  • Replace oil in hub to manufacturer's specifications.
(Use only soap and water to clean caps, no solvents (solvents can cause clouding and premature failure of caps. Solvent use will void warranty)
Installation K CVC Grip Trac Kit
K CVC Grip Trac.pdf
Adobe Acrobat document [377.1 KB]
Print | Sitemap
Permission required prior to use of information on this site