KileTM Rotor Flights
KRF80 kit-$995US+s&h(includes 2 flights;2 wearplates; mounting hardware)
KRF60kit-$1095US+s&h (includes 3 flights;3 wearplates; mounting hardware)
KXF88 kit- $650US+s&h (includes 2 flights; 2 wearplates; mounting hardware)
KRF Replacement wearplates:
60 series kit $280US+s&h 
80 series kit $260US+s&h
KXF Replacement wearplates: $257.98+S&H
Optional wearplates
Sharpened Edge Cast Chrome Alloy--This plate is designed for material sizing where wrapping, which can cause rotor bearing failure, is a problem, such as in grass harvesting.
60 series kit $325US+s&h 80 series kit $290US+s&h
ALL REPLACEMENT WEARPLATE KITS COME WITH MOUNTING HARDWARE.
KileTM Rotor Transition Plate Kits
Abrasive-resistant alloy steel which bolt onto existing rotor plates. Our transition plates re-establish the correct height and length of the original rotor specifications.
K-RTP-60--set of 3--$255US+s&h K-RTP-80--set of 4--$285US+s&h
Thresh Bars Mounting hardware included with stated prices
Specialty rotor thresh bars:
K 503 (reverse angle) $21.75 US each + s&h
K 504 (standard angle) $21.75 US each + s&h
K 505 (bi angle) $21.75 US each + s&h
K 506 (extended rasps) $21.75 US each + s&h
K 506DI (extended rasps-ductile iron) $20.75 US each + s&h
K 4015 non-spiked $18.52 USeach + s&h
K 4016 spiked $19.43 USeach + s&h
Standard rotor thresh bars:
K 4009 60 Series $863.00US set + s&h
K 4010 80 Series $924.00US set + s&h
KileTM Clear View Caps (Patent Pending)
STX:
Part#K-CVC-STX/OR Kit: (16 idler & 24 roller caps with o-rings and 40 plugs) $619US+s&h
Individual Parts: K 8743-I (idler cap)$19.95USea +s&h (includes plug + oring)
K 8740-R (roller cap) $17.95USea +s&h (includes plug + 2 orings)
K 5426 IOR (ilder o-ring) $2.00USea+ s&h
K 2780 ROR (roller o-ring)(fits STX tractors serial #107427 & below) $2.00USea +s&h
K 4140 ROR (roller o-ring)(fits STX tractor serial #107428 & above) $2.00USea +s&h
Set: K STX 2780E o-rings (16idler &24 roller o-rings) $80.00US+s&h
K STX 4140L o-rings (16 idler & 24 roller o-rings) $80.00US + s&h
CIH Trac Combines (Combine Trac Systems)
Part # K CVC CTS/OR Kit: (contains 8 idler/12 roller caps with orings & 20 plugs) $309.50US + s&h
Individual Parts: K 8743-I (idler cap)$17.95USea +s&h (includes a plug)
K 8740-R (roller cap) $15.95USea +s&h (includes a plug)
K 5426 IOR (idler o-ring) $2.00USea +s&h
K 4140 ROR (roller o-ring) $2.00USea+s&h
Set: K CTS o-rings (8 idler & 12 roller o-rings) $40.00US+s&h
9300 Series:
Part #K-CVC-9300: (contains 16 idler/24 roller caps with gaskets/orings 24 plugs & necessary bolts/washers) $749US+s&h
Individual Parts: K 9343-I (idler cap) $14.95 US +s&h (includes gasket)
K 9340-R (roller cap) $23.95 US + s&h (includes plug)
O-rings-K-237-R $0.99 US +s&h K-012-P $0.20 US + s&h
Gasket-K-9343-IG $3.48 US +s&h
Plug- K-1215-P $0.99 US +s&h
Bolt K-820-HHCS$0.12 US + s&h
Washer K-516-FL$0.03 US+s&h
Set: K 9343-G (16 9300 Idler Gaskets;24 Roller o-rings) $65.00 US +s&h
John Deere:
Part # K CVC JD 8RT (4 idler caps/12 roller caps) $396US +s&h
Part# K CVC JD 9RT (4 idler caps/16 roller caps) $489US +s&h
Part # K CVC JD 8000 (4 idler caps/12 roller caps) $485US + s&h
Part # K CVC JD 8500 (4 idler caps/12 roller caps) $485US + s&h
Part # K CVC JD 9000 (4 idler caps/16 roller caps) $515US + s&h
Individual parts:
K JD8024-R (8000 series roller cap) $29.15 US + s&h (includes cap, plug & gasket)
K JD8025-I (8000 series idler cap) $35.24 US +s&h(includes cap, plug & gasket)
K JD8024-RG (8000 series roller gasket) $5.90 US + s&h
K JD8025-IG (8000 series idler gasket) $6.70 US + s&h
K JD9034-R (9000 series roller cap) $23.10 US + s&h(includes cap & plug)
K JD9035-I (9000 series idler cap) $35.60 US + s&h (includes cap, plug & o-ring)
K JD159-IOR (9000 series idler o-ring) $2.00 US + s&h
K JD240S7-ROR (9000 series silicone roller o-ring) $2.00 + s&h
K JD9850-R (9800 series roller cap) $23.12 US + s&h (includes cap, plug & o-ring)
K JD9852-I (9800 series idler cap) $29.80 US + s&h (includes cap, plug & o-ring)
K JD366-OR (9800 idler o-ring) $2.50 US + s&h
K JD348-OR (9800 roller o-ring) $2.25 US + s&h
Sets: K JD 8000-G (8000 JD Gasket Kit 4 Idler/12 Roller gaskets) $80US + s&h
K JD 8500 (4 JD8025-I gaskets; 12 JD240S7-ROR Silicone orings) $48.00US + s&h
K JD 9000-OR (9000 JD O-Ring Kit 4 Idler,16 silicone o-rings) $40.00US + s&h
K JD 8RT-OR (4 Idler/12 Roller o-rings) $30US + s&h
K JD 9RT-OR (9 Kit 4 Idler/16 Roller o-rings) $40US + s&h
Cat / Challenger:
Challenger Series Kits:
Part# K CVC CH543 Kit: (fits 35,45,55)
(4 idlers/12 rollers with gaskets and plugs) $ 439.00US + s&h
Part # K CVC CH987 Kit: (fits A,B,C,D & E series-65,75,85,95)
(18 caps for rollers & upgrade most idler caps; with gaskets and plugs) $515.00 US + s&h
For converting only idlers:
Part # K CVC 987-I-1 (fits idler wheels of A & B series tractors) $65.00 US + S&H
Part # K CVC 987-I-2 (fits idler wheels of C,D & E series tractors) $65.00 US + S&H
Both these kits contain 2 caps, gaskets & plugs to update your present idler cap.
MT Challenger Series Kit:
Part#K-CVC-MT700-16 piece kit
(4 idlers/12 rollers gaskets)$381.00US+s&h
Part#K-CVC-MT800-20 piece kit
(4 idlers/16 rollers & gaskets) $464.00US+s&h
Individual Parts:
K CH3455-R (roller cap) $26.16US + s&h(includes gasket and o-ring)
K CH3456-I (idler cap) $31.49US + s&h (includes gasket and o-ring)
K CH3455-RG (roller gasket) $2.97US + s&h
K CH3456-IG (idler gasket) $5.45US + s&h
K MT6512-R (roller cap) $21.50US + s&h(includes gasket)
K MT6514-I (idler cap) $31.00US + s&h(includes gasket)
K MT6512-RG (roller gasket) $3.38US + s&h
K MT6514-IG (idler gasket) $5.65US + s&h
MT 8mmx20 bolt $0.20US + s&h
Sets: K MT 700-G (MT700-4 Idler/12 Roller Gaskets) $50US + s&h
K MT 800-G (MT800-4 Idler/16 Roller Gaskets) $60US + s&h
K CH 543-G (CH543-4 Idler/12 Roller Gaskets) $40US + s&h
K CH 987-G (CH987-16 Roller Gaskets) $40US + s&h
Plug :
K 1215-P (plug with o-ring for STX, 9300, CH Challenger & JD) $0.99USea
K 012P OR (o-ring for plug) $0.20USea
