Thresh Bars
KileTM Rotor Thresh Bars for AFX/Specialty Rotors & Case IH Small Tube Rotors (U.S. Patent 8,087,982)
K 506 Bar
Improve rotor thresh with Kile bars for AFX/Specialty rotors. The part that feeds the rotor and makes it aggressive are the thresh bars. With the wider area, Kile rotor bars feed the crop to the concave to perform a more complete thresh. Threshing is the act of grain rubbing on grain. The wide extended rasped ramp and aggressive face area of the K506 bar creates more contact on the concave allowing more crop to rub on itself. These deeper and wider rasps, on each bar, are aggressive yet gentle on the crop allowing the material to be 'managed' thru the threshing/separating system.
K 506
Features:
- wider bar section for crop feeding
- 26% larger surface area per bar than OEM
- 40 degree rasped ramp angle
- 1.4 times larger surface area on ramp than OEM
- wider and deeper extended rasps are aggressive yet gentle on crops
- significantly reduces over thresh
- reduces cracks and splits in seed coats
- enhances the separation of material for a cleaner tank sample
- works well in all crops, especially corn, beans and small grains
- available in cast chrome alloy (high impact resistant) or ductile iron for excellent wearability
K 504 Bar
Improve rotor thresh with Kile bars for AFX/Specialty rotors. The part that feeds the rotor and makes it aggressive are the thresh bars. With the wider block, Kile rotor bars feed the crop to the concave to perform a more complete thresh. Threshing is the act of grain rubbing on grain. The wider ramp and face area of the Kile bars creates more contact on the concave allowing more crop to rub on itself. With the advanced design of our bar, the material is 'managed' to enable a more aggressiveness to the thresh as the transport vanes move the crop along the threshing/separating system.
Standard Angle K 504
Features:
- wider block section for crop feeding
- 50% larger surface area per bar than OEM
- 40 degree ramp angle
- 2.2 times larger surface area on ramp than OEM
- gives a more complete thresh over the concave
- enhances the separation of material
- well suited for small grain crops, especially hard threshing wheat
- works well in all crops
- reduces over thresh
- made of cast chrome alloy (high impact resistant) excellent wearability
K 505 and K 503 Bars
Improve rotor thresh with Kile bars for AFX/Specialty rotors. These bars feature either a reverse angle or combination of standard and reverse angle. The K504 and K506 bars are the primary bars on a rotor. The K 505 or K503 bars are considered to be complimentary bars to the K504 and K506 to be used to fine tune a rotor for special circumstances or as the operator chooses.
Bi angle K 505 Reverse Angle K503
Features:
- wider block section for crop feeding
- 50% larger surface area per bar than OEM
- 40 degree ramp angle
- 2.2 times larger surface area on ramp than OEM
- straight lead in & combination of standard & reverse angles give a more complete thresh over the concave (K505)
- standard & reverse rasp angles (K505), or the reverse angle bar (K503), feeds & combs material a different direction without retarding material flow
- enhances the separation of material for a cleaner tank sample
- works well in all crops, especially hard threshing crops, without over threshing
- made of cast chrome allowy (high impact resistant) excellent wearability
For prices, click on Parts & Prices tab
Cast Chrome Replacement OEM Cylinder Bars
Features:
- OEM replacement bars
AFX/specialty rotors bars
Non-spiked (K 4015) Spiked (K 4016)
- sold individually for specialty and AFX rotors
- high quality cast chrome (impact resistant) excellent wearability
Standard rotor bar kits for 40/60/80 rotors
Straight bar Helical bar
- sold by sets only for standard rotors
- high quality cast chrome (impact resistant) excellent wearability
- same features as OEM bars
